In order for the sound to be recorded, an auditorium microphone must be used. Do not forget to turn it on and make sure that it is working. You should also be able to hear the sound yourself in the lecture hall, throughout the recording. If this is not the case, the sound will not be recorded. As soon as the start time of the programming is reached, the recording layout is reset to the default settings. If you want to make changes to the recording layout (e.g. camera only, beamer only, camera and beamer), you must therefore make them after the start time of the recording. On the touch panel in the lecture hall, you can see the image that is being captured during the recording. If this does not correspond to the desired layout, the recording layout must be changed on the touch panel. |